SMT Component Package Types & Sizes Explained (0402 to 1206)
TL;DR / Key Takeaways
– SMT component packages are named by their physical dimensions in imperial units, with metric equivalents: 0402 = 1.0 × 0.5 mm, 0603 = 1.6 × 0.8 mm, 0805 = 2.0 × 1.25 mm, 1206 = 3.2 × 1.6 mm.
– Resistors, capacitors, and inductors use the two-digit chip codes; integrated circuits (ICs) use lead-frame packages like SOP, QFP, PLCC, and grid packages like BGA.
– Package size drives PCB density, placement speed, and rework difficulty — smaller packages enable miniaturization but demand tighter process control.
– AISMT supplies the nozzles and feeders sized to each package, so placement machines handle everything from 0201 chips to large QFPs and BGAs.
Order the wrong package — or confuse an 0603 with an 0805 — and the part won’t pick, won’t place, or won’t solder, leaving the line stopped while the bill of materials is corrected. AISMT supplies nozzles and feeders matched to every package size, so a 0201 chip and a large QFP each place cleanly on the first pass. Here is how SMT component package types and sizes work, and how to read them without mistakes.
Chip Packages: Resistors, Capacitors, and Inductors
Chip components are the smallest and most common SMT parts. They are rectangular bodies with two terminal ends, named by their length and width in hundredths of an inch.
| Imperial Code | Metric Code | Dimensions (L × W) | Typical Use |
|---|---|---|---|
| 0201 | 0603 | 0.6 × 0.3 mm | Ultra-compact mobile devices |
| 0402 | 1005 | 1.0 × 0.5 mm | High-density consumer boards |
| 0603 | 1608 | 1.6 × 0.8 mm | Most common general-purpose size |
| 0805 | 2012 | 2.0 × 1.25 mm | Power and industrial boards |
| 1206 | 3216 | 3.2 × 1.6 mm | Higher power and easy manual rework |
The two code systems name the same part. The imperial code (0402, 0603, 0805, 1206) dominates datasheets and BOMs, while the metric code (1005, 1608, 2012, 3216) appears on Japanese and some Asian component markings. Both describe identical dimensions.
Reading Chip Component Markings
Chip resistors and capacitors carry printed codes that encode their value:
| Marking | Meaning | Value |
|---|---|---|
| 2R2 | 2.2 Ω | 2.2 Ω |
| 1K5 | 1.5 kΩ | 1,500 Ω |
| 103J | 10 × 10³ Ω | 10 kΩ (±5%) |
| 1002F | 100 × 10² Ω | 10 kΩ (±1%) |
For capacitors, the same three-digit logic applies but in picofarads: 103K = 10 × 10³ pF = 10 nF, and 104Z = 10 × 10⁴ pF = 100 nF. The trailing letter (J, K, Z, F) is the tolerance code.
Capacitors also come in distinct dielectric families: ceramic (C/C), tantalum (T/C), and electrolytic (E/C), each with different size, polarity, and frequency characteristics.
Diode Packages
Diodes — rectifier, Zener, and LED types — are polarized components with a defined anode and cathode. Common SMT diode packages include SOD-123, SOD-323, and SOD-523. Because polarity matters, orientation is verified by vision during placement, and the cathode is usually marked with a band.
IC Packages
Integrated circuits use three main package families, distinguished by how the leads or balls connect to the board:
| Package | Lead Style | Typical Lead Pitch | Characteristics |
|---|---|---|---|
| SOP / SOJ | Gull-wing or J-lead on two sides | 0.65–1.27 mm | Simple, low pin count |
| QFP | Gull-wing leads on four sides | 0.4–0.8 mm | Medium pin count, fine pitch |
| PLCC | J-lead on four sides | 1.27 mm | Robust, socketable |
| BGA / QFN | Solder balls or pads underneath | 0.4–1.0 mm ball pitch | High density, hidden joints |
SOP (Small Outline Package) and SOJ (Small Outline J-lead) suit low-to-medium pin counts. QFP (Quad Flat Package) puts leads on all four sides for higher pin counts. BGA (Ball Grid Array) replaces leads with an array of solder balls under the package, maximizing density but requiring X-ray inspection because the joints are hidden.
Inductor Units and Markings
Inductors follow a parallel marking scheme, with values in henries:
- 1 H = 10³ mH = 10⁶ µH = 10⁹ nH
R68J= 680 nH,101J= 100 µH,1R0= 1 µH,150K= 15 µH
The letter R marks the decimal point in the same way it does for resistors and capacitors.
Choosing the Right Package for Your Line
Package size directly affects three production decisions:
- Placement nozzle size — smaller packages need smaller nozzle orifices; using the wrong nozzle drops components or leaks vacuum.
- Feeder type — 0201 and 01005 parts need high-precision feeders; larger chips run on standard 8 mm tape feeders.
- Inspection method — chips under 0603 and all BGAs benefit from AOI and X-ray verification.
AISMT supplies nozzles and feeders matched to package size across FUJI, JUKI, Yamaha, Panasonic, ASM Siemens, Samsung, and Hanwha machines, so a single line can handle everything from 0201 chips to large QFPs without nozzle changes slowing the run.
FAQ
Q: What does the 0402 package size mean?
0402 is an imperial code meaning 0.04 × 0.02 inches, equal to 1.0 × 0.5 mm. The same part is labeled 1005 in metric code.
Q: What is the difference between imperial and metric SMT package codes?
Imperial codes express dimensions in hundredths of an inch (0402, 0603, 0805, 1206). Metric codes express the same dimensions in tenths of a millimeter (1005, 1608, 2012, 3216). Both refer to identical physical sizes.
Q: What is the most common SMT chip size?
0603 (1.6 × 0.8 mm) is the most widely used general-purpose size, balancing board density with reliable placement and rework.
Q: How do I read a chip resistor marking like 103J?
The first two digits are significant figures and the third is a multiplier: 10 × 10³ = 10 kΩ. The letter is the tolerance code, with J meaning ±5% and F meaning ±1%.
Q: Why do BGA packages need X-ray inspection?
BGA solder joints sit underneath the package where AOI cameras cannot see them. X-ray inspection is the only non-destructive way to verify hidden ball joints.


Add comment