Return to previous page

Lift Gate Conveyor for SMT Lines | 650 mm Walkway

Brand:

SKU: Lift Gate Conveyor for SMT Lines | 650 mm Walkway Categories: , Tags: , ,
Lift Gate Conveyor for SMT Lines transfers boards between machines; its gate lifts vertically to open a 650 mm mid-line walkway for operators, tooling and small carts. 900 ± 20 mm line height, SMEMA handshake.

Get a free quote

Please feel free to tell us what you need! we are here to help!

    I am looking for the

    The Lift Gate Conveyor for SMT Lines is a material handling device used between machines on an SMT line. Its gate section lifts vertically to open a 650 mm passage mid-line, giving operators, equipment and small carts a way across — and cutting the walking time those trips would otherwise cost.

    The same unit is sometimes listed as a lowering gate conveyor or a lift gate conveyor; the names differ, the mechanical design does not. All of them combine a vertical gate, a motorized lift system and guide pillars, so personnel can cross the line without shutting it down.

    Placement follows traffic. Feeder trolleys, stencil checks, reflow verification and AOI rejudge all happen at the rear of machines, yet most layouts offer entries only at the line ends. A mid-line passage conveyor puts the crossing where the foot traffic already is — one gate cycle of ~5–10 s per board buys back dozens of minutes of walking per operator per shift.

    Lift Gate Conveyor for SMT Lines

    # Item Specification Note
    1 Product Telescopic gate conveyor Mid-line retractable passage section
    2 Passage width 650 mm (700 mm optional — confirm) Set by stroke, independent of height
    3 Retraction Horizontal, conveyor section slides to home Opening clear of moving parts
    4 Cycle time ~15–20 s extend + retract (confirm) Absorbed by neighbor-machine buffers
    5 Transport height 900 ± 20 mm (or customized) Global SMT line standard
    6 PCB width 50–460 mm, lead-screw parallel adjustment Rails move equally, board stays centered
    7 Travel drive Motorized, inverter-controlled Smooth acceleration, no end-of-travel jerk
    8 Belt type ESD anti-static belt (confirm grade) Charge-neutral boards at handover
    9 Signal interface SMEMA handshake, both ends Compatible with all major brands
    10 Transport direction L→R or R→L (specified at order) Not a front-panel switch
    11 Power supply AC 1P 110 V / 220 V (confirm) Dual voltage for export
    12 Safety Photoelectric sensors; torque limiter (confirm) Stops travel on obstruction
    13 Frame Aluminum profile, welded steel base Stable travel, long service life