The PCB Vacuum Magazine Loader starts where every SMT line begins — where boards move from magazine to conveyor. That first handoff sets the pace for every process after it. Sitting at the front end of the line, the loader picks bare boards by vacuum suction and feeds double-sided boards by push-feed, so one machine covers both board types from the first touch.
Replace Hand Loading with Automated Feeding
Most lines still do this by hand. An operator stacks boards at the line entry and feeds them one at a time — slow, and hard on the boards. Hand loading scratches bare boards, and double-sided boards are worse, because one side must stay untouched. The Vacuum Magazine Loader removes both problems. Vacuum suction lifts a bare board by the top surface, and push-feed advances a double-sided board without ever contacting the underside.
Three Magazines, Continuous Feeding
Boards are held in three magazines — one upper and two lower — so the machine keeps feeding while a magazine is changed. Four pitch options (10 / 20 / 30 / 40 mm) match the spacing of the first machine on the line, and a 400-board capacity at 0.6 mm thickness means the operator is not tied to the line.
Rigid Frame, Universal Board Handling
The frame is high-strength aluminum alloy, rigid enough to hold a stable feed position through a full shift. A one-piece cast lifting platform with three-point pneumatic clamping and universal nozzle positioning lets it handle any board from 50 × 80 mm up to 530 × 460 mm.
SMEMA Ready, Touchscreen Control
It connects to the line over SMEMA, runs on a 7-inch color touchscreen, and pairs with an LED tower light so the operator reads line status at a glance. For a line that starts with two board types, this is the one loader that feeds both.
Specifications
| Item | Value |
| Model | GVL series |
| Board types | Bare board (vacuum suction) / Double-sided board (push-feed) |
| PCB size (L × W) | 50 × 80 – 530 × 460 mm |
| Magazine quantity | 1 upper / 2 lower |
| Magazine capacity | 400 PCBs at 0.6 mm thickness |
| Loading cycle time | Approx. 12 s |
| Pitch options | 10 / 20 / 30 / 40 mm |
| Transport height | 900 ± 20 mm |
| Communication | SMEMA compatible |
| Control | 7″ color touchscreen + LED tower light |
| Air supply | 4–6 bar, max 30 L/min |
| Power supply | AC 110/220 V, max 300 W |
| Frame | High-strength aluminum alloy |
| Lifting platform | One-piece cast, 3-point pneumatic clamping |


